"Tunable Technology"

Six-chamber monocore configuration

Seven-chamber monocore configuration

Nine-chamber monocore configurations

The Model 1 silencer ships from the factory as a single unit but may be assembled in a variety of configurations. This ability to adjust the performance of your Model 1 based on three variables— modules, wipes and ablative agent— is a feature we call “Tunable Technology.” The shooter may configure the Model 1 with one, two or all three modules, based on considerations such as the desired overall length of the silencer, the degree of sound reduction and subjective factors such as the tonal quality of the sound reduction.

K-Can Configuration
•  “Kurz” is German for “short.” It is traditional in the silencer industry to refer to any short pistol silencer as a “K-can.”  Shooting the Model 1 with only module 1 is as short as the Model 1 can be configured, therefore we call this the K-can configuration.

•  It is safe to fire expanding bullets (hollow points) through module 1 in the K-can configuration because the bullet will not impact a wipe.
• The K-can configuration provides hearing-safe sound reduction (less than 140 dB).

Six-Chamber and Seven-Chamber

Monocore Configurations

•  You may congfigure your Model 1 silencer for monocore performance (without wipes) by adding either module 2 or 3 to module 1.  Adding module 2 creates a seven-chamber monocore silencer while the addition of module 3 creates a six-chamber design.

•  It is safe to fire expanding bullets (hollow points) in a monocore configuration as long as module 2 or 3 does not contain any wipes.
•  Never shoot expanding bullets when wipes are installed!

Nine-Chamber

Monocore Configurations

•  You may congfigure the silencer with module 2 and 3 attached to module 1 (without wipes installed in either module 2 or 3) to create a nine-chamber monocore maximum length silencer.

•  It is safe to fire expanding bullets (hollow points) as long as modules 2  and 3 do not contain any wipes.
•  Never shoot expanding bullets when wipes are installed!

  • Facebook Social Icon